Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 411

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command

and contact your switch service provider.

<timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>,

No new security policy data to apply.

Indicates that no changes in the defined security policy database need to be activated at this time.

Verify that the security event was planned. First change some policy definitions, then run the

secPolicyActivate command to activate the policies.

<timestamp>, [SEC-1072], <sequence-number>,, ERROR, <system-name>,

<Policy type> Policy List is Empty!

Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons.

Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command

and contact your switch service provider.

<timestamp>, [SEC-1073], <sequence-number>,, ERROR, <system-name>,

No FCS policy in list!

Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons.

Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command

and contact your switch service provider.

Fabric OS Message Reference

Publication Number: 53-1000242-01