Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 527

AUDIT SEC System Messages
SEC-3001
Message
AUDIT, <timestamp>, [SEC-3001], INFO, SECURITY, <event-initiator-
details>, <event-location>, , Event: <Event Name>, Status: success,
Info: Security mode <State change: Enabled or Disabled> on the
fabric.
Probable Indicates that the security mode of the fabric was either enabled or disabled.
Cause
Recommended Verify that the security mode change was planned. If the security mode change was planned, no action
Action
is required. If the security mode change was not planned, take appropriate action as defined by your
enterprise security policy.
Severity
INFO
SEC-3002
Message
AUDIT, <timestamp>, [SEC-3002], INFO, SECURITY, <event-initiator-
details>, <event-location>, , Event: <Event Name>, Status: success,
Info: <Event Related Info>.
Probable Indicates that the specified security event has occurred. The Event Name can be one of the following:
Cause
•
•
•
•
•
Recommended
Verify that the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
There has been an FCS failover.
A security policy has been activated.
A security policy has been saved.
A security policy has been aborted.
A non-FCS password has changed.
Chapter
77
77-1