Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 403

SEC-1037
Message
<timestamp>, [SEC-1037], <sequence-number>,, ERROR, <system-name>,
Invalid WWN format <invalid WWN>.
Probable Indicates that the WWN entered in the policy member list had an invalid format.
Cause
Recommended
Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight colon
Action
separated pairs. For example: 50:06:04:81:D6:F3:45:42.
Severity
ERROR
SEC-1038
Message
<timestamp>, [SEC-1038], <sequence-number>,, ERROR, <system-name>,
Invalid domain <domain ID>.
Probable
Indicates that an invalid domain ID was entered.
Cause
Recommended
Verify that the domain ID is correct, if not, then re-run the command using the correct domain ID.
Action
Severity ERROR
SEC-1040
Message
<timestamp>, [SEC-1040], <sequence-number>,, ERROR, <system-name>,
Invalid portlist (<port list>). Cannot combine * with port member in
the same portlist.
Probable
Indicates that the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a
Cause port list.
Recommended
Enter the port list values without any wildcards.
Action
Severity ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1037
58-9