Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 440

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

58
SEC-1186
SEC-1186
Message
<timestamp>, [SEC-1186], <sequence-number>,, INFO, <system-name>,
<action> Radius Configuration.
Probable
Indicates that the RADIUS configuration was enabled or disabled as the primary AAA mechanism.
Cause
Recommended
No action is required.
Action
Severity
INFO
SEC-1187
Message
<timestamp>, [SEC-1187], <sequence-number>,, INFO, <system-name>,
Security violation: Unauthorized switch <switch WWN> tries to join
fabric.
Probable
Indicates that an SCC security violation was reported. The specified unauthorized switch attempts to
Cause
join the fabric.
Recommended
Check the switch connection control policy (SCC policy specifies the WWNs of switches allowed in the
Action
fabric) to verify which switches are allowed in the fabric. If the switch should be allowed in the fabric
but not included in the SCC policy, add the switch to the policy. If the switch is not allowed access to
the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric.
Take appropriate action, as defined by your enterprise security policy.
Severity
INFO
SEC-1188
Message
<timestamp>, [SEC-1188], <sequence-number>,, INFO, <system-name>,
Security violation: Unauthorized device <device node name> tries to
FLOGI to index/area <port number> of switch <switch WWN>.
Probable
Indicates that a DCC security violation was reported. The specified device attempted to login using
Cause
FLOGI to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If
the device changes connected port, the device will not be allowed to login.
Recommended
Check DCC policy and verify that the specified device is allowed in the fabric and is included in the
Action
DCC policy. If the specified device not included in the policy, add it to the policy. If the host is not
allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to
access your fabric. Take appropriate action, as defined by your enterprise security policy.
58-46
Fabric OS Message Reference
Publication Number: 53-1000242-01

Advertisement

Table of Contents
loading

Table of Contents