Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 232

25
FW-1168
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
FW-1168
Message
<timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the number of signal losses that the port experiences has changed. Loss of signal generally
Cause
indicates a physical problem.
Recommended Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Action
Severity INFO
FW-1169
Message
<timestamp>, [FW-1169], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of signal losses that the port experiences has fallen below the low boundary.
Cause Loss of signal generally indicates a physical problem.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. A low number of signal loss errors means that the switch is functioning normally.
Severity INFO
FW-1170
Message
<timestamp>, [FW-1170], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of signal losses that the port experiences has risen above the high boundary.
Cause
Loss of signal generally indicates a physical problem.
25-26 Fabric OS Message Reference
Publication Number: 53-1000242-01