Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 447

SEC-1253
Message
<timestamp>, [SEC-1253], <sequence-number>,, ERROR, <system-name>,
Bad DCC interface state during <Phase>, state=<state>.
Probable Indicates that an internal error has caused the DCC policy update to fail in the provision, commit, or
Cause
cancel phases.
Recommended Retry the failed security command.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
SEC-1300
Message
<timestamp>, [SEC-1300], <sequence-number>,, INFO, <system-name>,
This switch is in VcEncode mode. Security is not supported.
Probable
Indicates that the switch is set up with VC-encoded mode.
Cause
Recommended
Turn off VC-encoded mode before enabling security.
Action
Severity
INFO
SEC-1301
Message
<timestamp>, [SEC-1301], <sequence-number>,, INFO, <system-name>,
This switch is in interop mode. Security is not supported.
Probable
Indicates that the switch is interop-mode enabled.
Cause
Recommended
Disable interop-mode using the interopMode command before enabling the Secure Fabric OS feature.
Action
Severity INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1253
58-53