Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 429

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
switch. This message might also be the result of an internal corruption or a hacker attack to the secure
fabric.
Severity
ERROR
SEC-1138
Message
<timestamp>, [SEC-1138], <sequence-number>,, INFO, <system-name>,
Security database download received from Primary FCS.
Probable
Indicates that a non-primary FCS switch received a security database download.
Cause
Recommended
Verify that the security event was planned. If the security event was planned, no action is required. If the
Action
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-1139
Message
<timestamp>, [SEC-1139], <sequence-number>,, ERROR, <system-name>,
THe RSNMP_POLICY cannot exist without the WSNMP_POLICY.
Probable
Indicates that the receiving switch fails to validate the security database sending from the primary FCS
Cause
switch. This message usually indicates that the data package is corrupted, the time stamp on the package
is out of range as a result of a replay attack or out-of-sync time service, or the signature verification
failed. Signature verification failure indicates either an internal error (such as losing the primary public
key) or an invalid database.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
switch. This message might also be the result of an internal corruption or a hacker attack to the secure
fabric.
Severity
ERROR
SEC-1142
Message
<timestamp>, [SEC-1142], <sequence-number>,, INFO, <system-name>,
Reject new policies. <reason text>.
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1138
58-35

Advertisement

Table of Contents
loading

Table of Contents