Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 436

58
SEC-1171
Severity
INFO
SEC-1171
Message
<timestamp>, [SEC-1171], <sequence-number>,, ERROR, <system-name>,
Disabled secure mode due to invalid security object.
Probable
Indicates that the switch is segmented, and secure mode is disabled on the switch because there was no
Cause
license present or no PKI objects.
Recommended
Run the pkiShow command to check if all PKI objects exist. If they do not exit, run the pkiCreate
Action command to create them for the switch.
Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain
a license if you do not have one.
Severity ERROR
SEC-1172
Message
<timestamp>, [SEC-1172], <sequence-number>,, ERROR, <system-name>,
Failed to identify role.
Probable Indicates that the switch is unable to determine its role (primary FCS or backup FCS) in the secure
Cause
fabric.
Recommended
Verify that all switches in the fabric are in time synchronization with the primary and that no external
Action
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity
ERROR
SEC-1173
Message
<timestamp>, [SEC-1173], <sequence-number>,, ERROR, <system-name>,
Lost contact with Primary FCS switch.
Probable
Indicates that the switch has lost contact with the primary FCS switch in the secure fabric. This could be
Cause due to the primary FCS being disabled.
Recommended
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Action
Severity
ERROR
58-42 Fabric OS Message Reference
Publication Number: 53-1000242-01