Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 361

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

PDM System Messages

<timestamp>, [PDM-1001], <sequence-number>,, WARNING, <system-

name>, Failed to parse the pdm config

Indicates that the PDM process could not parse the configuration file. This might be caused by a

missing configuration file during the installation.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1002], <sequence-number>,, WARNING, <system-

name>, ipcInit failed

Indicates that the PDM process could not initialize the IPC mechanism.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1003], <sequence-number>,, WARNING, <system-

name>, pdm [-d] -S <service> -s <instance>

Fabric OS Message Reference

Publication Number: 53-1000242-01