73
ZONE-1026
ZONE-1026
Message
<timestamp>, [ZONE-1026], <sequence-number>,, INFO, <system-name>,
port <port number> Out of CAM entries
Probable
Indicates that the total number of S_ID entries while creating or adding a zone group exceeds the limit.
Cause
Recommended
If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that port.
Action
Severity
INFO
ZONE-1027
Message
<timestamp>, [ZONE-1027], <sequence-number>,, INFO, <system-name>,
Zoning transaction aborted <error reason>. <AD Id>.
Probable
Indicates that the zoning transaction was aborted due to a variety of potential errors. The error reason
Cause
variable can be one of the following:
•
Zone Merge Received: The fabric is in the process of merging two zone databases.
•
Zone Config update Received: The fabric is in the process of updating the zone database.
•
Bad Zone Config: The new config is not viable.
•
Zoning Operation failed: A zoning operation failed.
•
Shell exited: The command shell has exited.
•
Unknown: An error was received for an unknown reason.
•
User Command: A user aborted the current zoning transaction.
•
Switch Shutting Down: The switch is currently shutting down.
Recommended
Many of the causes of this error message are transitory: for example because two admins are working
Action
with the zoning database concurrently. If you receive this error, wait a few minutes and try again. Verify
that no one else is currently modifying the zone database.
Severity
INFO
ZONE-1028
Message
<timestamp>, [ZONE-1028], <sequence-number>,, WARNING, <system-
name>, Commit zone DB larger than supported - <zone db size> greater
than <max zone db size>
73-8
Fabric OS Message Reference
Publication Number: 53-1000242-01