Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 293

HAM System Messages
HAM-1001
Message
<timestamp>, [HAM-1001], <sequence-number>, FFDC, CRITICAL,
<system-name>, Standby CP is not Healthy, device <device name>
status BAD, Severity = <Log="YES" Class="NONE" Severity>
Probable
Indicates that a standby CP device error is reported by the high-availability manager (HAM) Health
Cause Monitor, with a specific device and Log="YES" Class="NONE" Severity level. The severity level can
be "critical", "major", or "minor".
The active CP will continue to function normally, but because the standby CP is not healthy,
nondisruptive failover is not possible.
Recommended
Reboot the standby CP blade by ejecting the card and reseating it.
Action
If the problem persists, replace the standby CP.
Severity
CRITICAL
HAM-1002
Message
<timestamp>, [HAM-1002], <sequence-number>,, INFO, <system-name>,
Standby CP is Healthy
Probable
Indicates that all of the standby CP devices monitored by the HAM Health Monitor report no error.
Cause
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
26
26-1