Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 480

65
TRCE-1003
TRCE-1003
Message
<timestamp>, [TRCE-1003], <sequence-number>,, ERROR, <system-name>,
Trace dump< optional slot indicating on which slot the dump occurs >
was not transferred due to FTP error.
Probable
Indicates that a trace dump has been created on the switch or the indicated slot but is not automatically
Cause transferred from the switch due to an FTP error, such as a wrong FTP address, FTP site down, or
network down.
Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
ERROR
TRCE-1004
Message
<timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-
name>, Trace dump< optional slot indicating on which slot the dump
occurs > was not transferred because trace auto-FTP disabled.
Probable Indicates that trace dump files have been created on the switch or the indicated slot but are not
Cause
automatically transferred from the switch because auto-FTP is disabled.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action
and contact your switch service provider.
Severity
WARNING
TRCE-1005
Message
<timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>,
FTP Connectivity Test failed due to error.
Probable
Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong FTP
Cause
address, an FTP site down, or the network being down.
Recommended
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Note: You can also run the traceFtp -e command to enable auto-FTP.
Severity
ERROR
65-2 Fabric OS Message Reference
Publication Number: 53-1000242-01