Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 205

FSSM System Messages
FSSM-1002
Message
<timestamp>, [FSSM-1002], <sequence-number>,, INFO, <system-name>,
HA State is in sync
Probable
Indicates that the HA state for the active CP is in synchronization with the HA state of the standby CP.
Cause
If the standby CP is healthy, then a failover is nondisruptive. For more information on the haFailover
command, refer to the Fabric OS Command Reference.
Recommended No action is required.
Action
Severity INFO
FSSM-1003
Message
<timestamp>, [FSSM-1003], <sequence-number>,, WARNING, <system-
name>, HA State out of sync
Probable Indicates that the HA state for the active CP is out of synchronization with the HA state of the standby
Cause
CP. If the active CP failover occurs when the HA state is out of sync, the failover is disruptive.
Recommended If this message was logged as a result of a user-initiated action (such as running the switchReboot
Action
command), then no action is required.
Otherwise, issue the haSyncStart command on the active CP and try resynchronizing the HA state. If
the HA state does not become synchronized, run the haDump command to diagnose the problem.
Severity
WARNING
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
24
24-1