Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 282

25
FW-1401
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
FW-1401
Message
<timestamp>, [FW-1401], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and
Cause
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future
problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
FW-1402
Message
<timestamp>, [FW-1402], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the flash usage percentage has risen above the high boundary. Flash increases and
Cause
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future
problems.
Recommended
You might have to remove some unwanted files to create some flash space. Run the saveCore command
Action to remove files from the kernel space.
Severity
WARNING
FW-1403
Message
<timestamp>, [FW-1403], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
25-76 Fabric OS Message Reference
Publication Number: 53-1000242-01