Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 383

RCS System Messages
RCS-1001
Message
<timestamp>, [RCS-1001], <sequence-number>,, INFO, <system-name>,
RCS has been disabled. Some switches in the fabric do not support
this feature
Probable
Indicates that the RCS feature has been disabled on the local switch because not all switches in the
Cause fabric support RCS or the switch is in nonnative mode.
Recommended Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS
Action v2.6, v3.1 and greater, v4.1 and greater.
Run the firmwareDownload command to upgrade the firmware for any switches that do not support
RCS.
Severity
INFO
RCS-1002
Message
<timestamp>, [RCS-1002], <sequence-number>,, INFO, <system-name>,
RCS has been enabled.
Probable
Indicates that the RCS feature has been enabled. RCS must be capable on all switches in the fabric to be
Cause enabled. If all switches are capable, it is automatically enabled.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
54
54-1