Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 423

SEC-1108
Message
<timestamp>, [SEC-1108], <sequence-number>,, ERROR, <system-name>,
Fail to reset stamp on all switches.
Probable Indicates that a version reset operation failed either because the switch could not get all the required
Cause
resources to perform the operation or because it failed to send the message to all switches in the fabric.
Recommended Verify that the security event was planned. If the security event was planned, run the secFabricShow
Action
command to verify that all switches in the fabric are in the ready state. When all switches are in the
ready state, retry the operation.
Severity
ERROR
SEC-1110
Message
<timestamp>, [SEC-1110], <sequence-number>,, ERROR, <system-name>,
FCS list must be the first entry in the [Defined Security policies]
section. Fail to download defined database.
Probable Indicates that a security policy download is attempted with a defined policy that does not have the FCS
Cause
policy as the first policy. The FCS policy is required to be the first policy in the defined security
database.
Recommended
Download a correct configuration with the FCS policy as the first policy in the defined security
Action database.
Severity
ERROR
SEC-1111
Message
<timestamp>, [SEC-1111], <sequence-number>,, ERROR, <system-name>,
New defined FCS list must have at least one member in common with
current active FCS list. Fail to download defined database.
Probable Indicates that the defined and active FCS policy list failed to have at least one member in common.
Cause
Recommended A new FCS policy list must have at least one member in common with the previous FCS policy.
Action
Severity
ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1108
58-29