Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 181

FCR-1038
Message
<timestamp>, [FCR-1038], <sequence-number>,, WARNING, <system-
name>, Total zone entries exceeded local fabric limits by
<overflow> entries, in zone: <zone name>, zone limit: <LSAN zone
limit>.
Probable
Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local
Cause switch's zone database limitations.
Recommended Remove excess cfg/zone/alias entries so that the number of LSAN zones created is within the range of
Action the local database limitations.
Severity WARNING
FCR-1039
Message
<timestamp>, [FCR-1039], <sequence-number>,, INFO, <system-name>,
Local LSAN zone <zone name> device entries for backbone LSAN
exhausted.
Probable
Indicates that the number of devices in an LSAN defined in the backbone fabric is greater than allowed
Cause by the local LSAN zone database limitations.
Recommended Remove excess device entries from this LSAN zone until the number of devices is within the range of
Action the local LSAN zone database limitations.
Severity INFO
FCR-1040
Message
<timestamp>, [FCR-1040], <sequence-number>,, INFO, <system-name>,
Proxy device deleted in the backbone fabric.
Probable Indicates that a proxy device created in the backbone fabric was deleted.
Cause
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
18
FCR-1038
18-13