Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 245

FW-1244
Message
<timestamp>, [FW-1244], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of EE word frames that the switch receives has changed. Receive performance
Cause
messages appear due to the number of word frames that travel from the configured S_ID to the D_ID
pair.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1245
Message
<timestamp>, [FW-1245], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of EE word frames that the switch receives has fallen below the low boundary.
Cause
Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity INFO
FW-1246
Message
<timestamp>, [FW-1246], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of EE word frames that the switch receives has risen above the high boundary.
Cause Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1244
25-39