Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 265

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

FW-1337
Message
<timestamp>, [FW-1337], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of DCC violations has fallen below the low boundary. DCC violations
Cause
indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the
specification of rules for binding device ports (typically HBA ports) to specific switch ports. DCC
policies ensure that whenever a device performs an FLOGI request, the WWN specified in the FLOGI
is validated to be connected to the authorized port. Enforcement for private loop devices not performing
FLOGI is done through the name server.
Recommended
No action is required.
Action
Severity
INFO
FW-1338
Message
<timestamp>, [FW-1338], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of DCC violations has risen above the high boundary. DCC violations indicate
Cause
that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of
rules for binding device ports (typically HBA ports) to specific switch ports. DCC policies ensure that
whenever a device performs an FLOGI request that the WWN specified in the FLOGI is validated to be
connected to the authorized port. Enforcement for private loop devices not performing FLOGI is done
through the name server.
Recommended
Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses
Action
to security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
WARNING
FW-1339
Message
<timestamp>, [FW-1339], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1337
25-59

Advertisement

Table of Contents
loading

Table of Contents