Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 465

Probable
Indicates that the blade in the indicated slot has rebooted with new firmware. This is a normal step in the
Cause
firmwareDownload process.
Recommended
Run the firmwareDownloadStatus command to monitor the firmwareDownload progress.
Action
Severity
WARNING
SULB-1025
Message
<timestamp>, [SULB-1025], <sequence-number>,, WARNING, <system-
name>, The blade in slot <Slot number> will reboot with the new
firmware.
Probable
Indicates that the new firmware has been downloaded to the specified AP blade and the AP blade will
Cause
reboot to active it.
Recommended
Wait for the AP blade to reboot.
Action
Severity
WARNING
SULB-1031
Message
<timestamp>, [SULB-1031], <sequence-number>,, WARNING, <system-
name>, The switch is relocating an internal firmware image.
Probable
Indicates that the switch has rebooted with the new firmware and is relocating the AP firmware.
Cause
Recommended
No action is required.
Action
Severity WARNING
SULB-1033
Message
<timestamp>, [SULB-1033], <sequence-number>,, WARNING, <system-
name>, Switch has completed relocating the internal firmware image.
Probable Indicates that the firmwareDownload process has completed normally on the switch.
Cause
Fabric OS Message Reference
Publication Number: 53-1000242-01
61
SULB-1025
61-3