Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 497

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

WEBD System Messages

<timestamp>, [WEBD-1001], <sequence-number>,, WARNING, <system-

name>, Missing or Invalid Certificate file -- HTTPS is configured to

be enabled but could not be started.

Indicates that the SSL certificate file is either invalid or absent.

Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For

more information on the configure command, refer to the Fabric OS Command Reference.

<timestamp>, [WEBD-1002], <sequence-number>,, WARNING, <system-

name>, Missing or Invalid Key file -- HTTPS is configured to be

enabled but could not be started.

Indicates that the SSL key file is either invalid or absent.

Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For

more information on the configure command, refer to the Fabric OS Command Reference.

<timestamp>, [WEBD-1003], <sequence-number>,, INFO, <system-name>,

HTTP/HTTPS interface disabled

Fabric OS Message Reference

Publication Number: 53-1000242-01