Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 82

2
AUTH-1011
Probable
Indicates an internal problem with the Secure Fabric OS.
Cause
Recommended
Reboot or power cycle the switch.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1011
Message
<timestamp>, [AUTH-1011], <sequence-number>,, WARNING, <system-
name>, Failed to register for failover operation: switch <switch
number> error <error code>
Probable Indicates an internal problem with the Secure Fabric OS.
Cause
Recommended Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
Action
switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
AUTH-1012
Message
<timestamp>, [AUTH-1012], <sequence-number>,, WARNING, <system-
name>, Authentication <code> is rejected: port <port number>
explain <explain code> reason <reason code>
Probable Indicates that an authentication is rejected because the remote entity does not support authentication.
Cause
Recommended
Make sure the entity at the other end of the link supports authentication.
Action
Severity
WARNING
2-4 Fabric OS Message Reference
Publication Number: 53-1000242-01