Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 512

73
ZONE-1031
ZONE-1031
Message
<timestamp>, [ZONE-1031], <sequence-number>,, ERROR, <system-name>,
Switch is in interop mode. (switch, port) members not supported.
Probable The switch is set to interop mode using the interopMode command. Interop mode does not allow
Cause
<domain, portarea> members in the active zone database.
Recommended Remove all <domain, portarea> members from the zone database, or convert them to WWN zoning.
Action
Severity ERROR
ZONE-1032
Message
<timestamp>, [ZONE-1032], <sequence-number>,, ERROR, <system-name>,
Domain <domain number> Max Zone DB size <max zone db size>
Probable
Indicates that the specified domain does not have enough memory for the zone database being
Cause
committed.
Recommended
Reduce the size of the zone database and retry the operation.
Action
Severity
ERROR
ZONE-1033
Message
<timestamp>, [ZONE-1033], <sequence-number>,, ERROR, <system-name>,
Domain <domain number> Lowest Max Zone DB size
Probable Indicates that the specified domain has the lowest memory available for the zone database in the fabric.
Cause The zone database must be smaller than the memory available on this domain.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR
73-10 Fabric OS Message Reference
Publication Number: 53-1000242-01