Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 228

25
FW-1138
FW-1138
Message
<timestamp>, [FW-1138], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of SFP state changes has fallen below the low boundary. SFP state changes
Cause
occur when the SFP is inserted or removed. A low number of SFP state changes means that the switch is
functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1139
Message
<timestamp>, [FW-1139], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of SFP state changes has risen above the high boundary. SFP state changes
Cause
occur when the SFP is inserted or removed.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1140
Message
<timestamp>, [FW-1140], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of SFP state changes has changed from a value outside of the acceptable range
Cause
to a value within the acceptable range. SFP state changes occur when the SFP is inserted or removed.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
25-22 Fabric OS Message Reference
Publication Number: 53-1000242-01