Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 211

Severity
INFO
FW-1012
Message
<timestamp>, [FW-1012], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the power supply counter changed from a value outside of the acceptable range to a value
Cause within the acceptable range.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity INFO
FW-1033
Message
<timestamp>, [FW-1033], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the temperature of the SFP has changed. Frequent fluctuations in SFP temperature might
Cause indicate a deteriorating SFP.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1034
Message
<timestamp>, [FW-1034], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the temperature of the SFP has fallen below the low boundary.
Cause
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1012
25-5