Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 190

18
FCR-1071
FCR-1071
Message
<timestamp>, [FCR-1071], <sequence-number>,, INFO, <system-name>,
Port <port number> is changed from non FCR port to FCR port.
Probable Indicates that the port became an EX or VEX port.
Cause
Recommended
No action is required.
Action
Severity
INFO
FCR-1072
Message
<timestamp>, [FCR-1072], <sequence-number>,, INFO, <system-name>,
Port <port number> is changed from FCR port to non FCR port.
Probable
Indicates that the port is no longer an EX or VEX port.
Cause
Recommended
No action is required.
Action
Severity INFO
FCR-1073
Message
<timestamp>, [FCR-1073], <sequence-number>,, INFO, <system-name>,
Switch with domain ID <domain ID> in fabric <fabric ID> has lower
limit of LSAN Zones supported
Probable
Indicates that a switch in the backbone/edge that supports different limit of LSAN Zones was detected.
Cause
Recommended
Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN to find the lowest
Action supported LSAN zone limits. Please make sure that total number of LSAN zones in the Meta-SAN are
within the lowest supported limit of LSAN zone
Severity INFO
18-22 Fabric OS Message Reference
Publication Number: 53-1000242-01