Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 206

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [FSSM-1004], <sequence-number>,, INFO, <system-name>,

Incompatible software version in HA synchronization.

Indicates that the active CP and the standby CP in a dual CP system are running firmware that are

incompatible with each other. If the active CP fails, the failover will be disruptive. In a non-bladed

system, this message is logged when the firmware upgrade/downgrade was invoked. The new firmware

version is not compatible with current running version. This cause a disruptive firmware upgrade/

For a dual CP system, run the firmwareDownload command to load compatible firmware on the

standby CP. For details on this command, refer to the Fabric OS Command Reference.

Fabric OS Message Reference

Publication Number: 53-1000242-01