Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 227

FW-1135
Message
<timestamp>, [FW-1135], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a
Cause
port or device initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1136
Message
<timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a
Cause
value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric.
The event is called a fabric login or FLOGI.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1137
Message
<timestamp>, [FW-1137], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the number of SFP state changes has changed. SFP state changes occur when the SFP is
Cause
inserted or removed.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1135
25-21