Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 476

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [SYSM-1003], <sequence-number>,, INFO, <system-name>,

<number>, Switch: <start reason>

Indicates that the user executed the switchStart or switchReboot command. This indicates that all

services are brought back up after a temporary shutdown of that logical switch.

No action is required if the switchStart command was executed intentionally. Because reinitializing a

switch is a disruptive operation and can stop I/O traffic, you might have to stop and restart the traffic

during this process.

<timestamp>, [SYSM-1004], <sequence-number>,, ERROR, <system-name>,

Failed to retrieve current chassis configuration option,

ret=<Unknown>

Indicates that there was a failure to read configuration data from the WWN card.

Verify that the WWN card is present and operational and that the affected CP is properly seated in its

<timestamp>, [SYSM-1005], <sequence-number>, FFDC, CRITICAL,

<system-name>, CP blade in slot <Slot number> failed to retrieve

current chassis type.

Indicates that there was a failure to read the chassis type from the system.

Verify that the CP blade is operational and is properly seated in its slot.

Fabric OS Message Reference

Publication Number: 53-1000242-01