Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 442

58
SEC-1192
Recommended
Check if the host IP address specified in the message can be used to manage the fabric through an HTTP
Action
connection. If so, add the host IP address to the HTTP policy of the fabric. If the host is not allowed
access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your
fabric. Take appropriate action, as defined by your enterprise security policy.
Severity INFO
SEC-1192
Message
<timestamp>, [SEC-1192], <sequence-number>,, INFO, <system-name>,
Security violation: Login failure attempt via <connection method>.
Probable
Indicates that a serial or modem login security violation was reported. An incorrect password was used
Cause while trying to log in through a serial or modem connection; the login failed.
Recommended
Use the correct password.
Action
Severity
INFO
SEC-1193
Message
<timestamp>, [SEC-1193], <sequence-number>,, INFO, <system-name>,
Security violation: Login failure attempt via <connection method>.
IP Addr: <IP address>
Probable Indicates that a specified login security violation was reported. The incorrect password was used while
Cause
trying to log in through the specified connection method; the login failed.
Recommended
The error message lists the violating IP address. Verify that this IP address is being used by a valid
Action
switch admin. Use the correct password.
Severity
INFO
SEC-1194
Message
<timestamp>, [SEC-1194], <sequence-number>,, WARNING, <system-
name>, This switch does not have all the required PKI objects
correctly installed.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
58-48 Fabric OS Message Reference
Publication Number: 53-1000242-01