Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 399

Severity
INFO
SEC-1025
Message
<timestamp>, [SEC-1025], <sequence-number>,, ERROR, <system-name>,
Invalid IP address (<IP address>) detected.
Probable
Indicates that a corruption occurred during the distribution of the security database. This can occur only
Cause when the primary FCS distributes the security database to the other switches in the fabric, then local
validation finds the error in the security database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
ERROR
SEC-1026
Message
<timestamp>, [SEC-1026], <sequence-number>,, ERROR, <system-name>,
Invalid format or character in switch member <switch member ID>.
Probable Indicates that a corruption occurred during the distribution of the security database. This can occur only
Cause when the primary FCS distributes the security database to the other switches in the fabric, then local
validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity ERROR
SEC-1028
Message
<timestamp>, [SEC-1028], <sequence-number>,, ERROR, <system-name>,
No name is specified.
Probable Indicates that a corruption occurred during the distribution of the security database. This can occur only
Cause
when the primary FCS distributes the security database to the other switches in the fabric, then local
validation finds the error in the security database. This is a rare occurrence.
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1025
58-5