Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 113

Severity
WARNING
BM-1056
Message
<timestamp>, [BM-1056], <sequence-number>,, INFO, <system-name>, AP
is not configured. Persistently disabling all ports on the switch.
Probable
The policy of the specified switch is to persistently disable all ports the first time the AP is detected, and
Cause
either the:
•
AP was detected for the first time on this switch
•
Switch was configured under a different mode
Recommended
Configure the switch and persistently enable the ports.
Action
Severity INFO
BM-1058
Message
<timestamp>, [BM-1058], <sequence-number>,, WARNING, <system-name>,
Download of AP firmware failed for the switch. Reissue
firmwaredownload to recover.
Probable
The automatic firmware upgrade on the AP has failed because AP firmware was detected to be different
Cause
from system firmware due to a firmware upgrade.
Recommended
Issue the firmwareDownload command to recover the AP.
Action
Severity
WARNING
Fabric OS Message Reference
Publication Number: 53-1000242-01
5
BM-1056
5-5