Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 159

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

FBC System Messages

<timestamp>, [FBC-1001], <sequence-number>,, ERROR, <system-name>,

Firmware version on AP blade is incompatible with that on the CP.

The CP determined that the version of firmware running on the AP blade is not compatible with the

version of firmware running on the CP.

The problem can be corrected by changing the version of firmware on the CP or AP blades. The

firmware version on the CP blade can be changed using the firmwareDownload command. Refer to the

release notes to determine whether a non-disruptive firmwareDownload is supported between the

versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the

AP blade. If required, send the AP blade back to the factory to get a new firmware version installed.

Fabric OS Message Reference

Publication Number: 53-1000242-01