Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 226

25
FW-1132
FW-1132
Message
<timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of zone changes has changed from a value outside of the acceptable range to a
Cause
value within the acceptable range. Zone changes occur when there is a change to the effective zone
configuration.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1133
Message
<timestamp>, [FW-1133], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
Cause
initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1134
Message
<timestamp>, [FW-1134], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when
Cause
a port or device initializes with the fabric. The event is called a fabric login or FLOGI. A low number of
fabric logins means that the fabric is functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
25-20 Fabric OS Message Reference
Publication Number: 53-1000242-01