Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 239

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [FW-1188], <sequence-number>,, INFO, <system-name>,

<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low

value>). Current value is <Value> <Unit>.

Indicates that the percentage of outgoing traffic that the port experiences has changed.

No action is required. Respond to this message as is appropriate to the particular policy of the end-user

installation.

<timestamp>, [FW-1189], <sequence-number>,, INFO, <system-name>,

<Port Name>, <Label>, is below low boundary(High=<High value>,

Low=<Low value>). Current value is <Value> <Unit>.

Indicates that the percentage of outgoing traffic that the port experiences has fallen below the low

No action is required. Respond to this message as is appropriate to the particular policy of the end-user

installation.

<timestamp>, [FW-1190], <sequence-number>,, INFO, <system-name>,

<Port Name>, <Label>, is above high boundary(High=<High value>,

Low=<Low value>). Current value is <Value> <Unit>.

Indicates that the percentage of outgoing traffic that the port experiences has risen above the high

No action is required. Respond to this message as is appropriate to the particular policy of the end-user

installation.

Fabric OS Message Reference

Publication Number: 53-1000242-01