Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 335

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [ISNS-1006], <sequence-number>,, INFO, <system-name>,

Start re-register with external iSNS server <iSNS server IP

address> slot/port <Slot number>/<Port number>.

Indicates that the re-register with the specified external iSNS server has started.

No action is required.

<timestamp>, [ISNS-1008], <sequence-number>,, INFO, <system-name>,

Peering with external iSNS server <iSNS server IP address> not

started because configuration unchanged.

Indicates that peering with the external iSNS server was already started with the same configuration.

No action is required. You can change the configuration and retry the peering with the external iSNS

<timestamp>, [ISNS-1009], <sequence-number>,, INFO, <system-name>,

Peering with external iSNS server <iSNS server IP address> not

started because no virtual targets found.

Indicates that no virtual targets were found, so peering was not started.

No action is required. Peering will resume automatically when virtual targets are detected.

Fabric OS Message Reference

Publication Number: 53-1000242-01