Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 223

Severity
INFO
FW-1125
Message
<timestamp>, [FW-1125], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of segmentations has changed. Segmentation changes might occur due to:
Cause
•
Zone conflicts.
•
Domain conflicts.
•
Segmentation of the principal link between two switches.
•
Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely,
incompatible parameters result in segmentation.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1126
Message
<timestamp>, [FW-1126], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the number of segmentations has fallen below the low boundary. Segmentation changes
Cause
might occur due to:
•
Zone conflicts.
•
Domain conflicts.
•
Segmentation of the principal link between two switches.
•
Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely,
incompatible parameters result in segmentation.
A low number of segmentation errors means that the fabric is functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1125
25-17