Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 189

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [FCR-1068], <sequence-number>,, INFO, <system-name>,

The FC Routing service is disabled.

Indicates that the FC Routing service is disabled. This is caused by fcrDisable, configDefault, or a

configDownload with the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by

the factory.

No action is required.

<timestamp>, [FCR-1069], <sequence-number>,, INFO, <system-name>,

The FC Routing service is enabled.

Indicates that the FC Routing service is enabled. This is caused by either fcrEnable, or a

configDownload with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by

the factory.

No action is required.

<timestamp>, [FCR-1070], <sequence-number>,, INFO, <system-name>,

The FC Routing configuration is set to default.

Indicates that the FC Routing configuration is set to default by user. This removes all old FC Routing

configuration.

No action is required.

Fabric OS Message Reference

Publication Number: 53-1000242-01