Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 283

Probable
Indicates that the flash usage percentage has changed from a value outside of the acceptable range to a
Cause
value within the acceptable range. Flash increases and decreases slightly with normal operation of the
switch. Excessive permanent increases can lead to future problems.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1424
Message
<timestamp>, [FW-1424], <sequence-number>,, WARNING, <system-name>,
Switch status changed from <Previous state> to <Current state>.
Probable Indicates that the switch status is not in a healthy state. This occurred because of a policy violation.
Cause
Recommended Run the switchStatusShow command to determine the policy violation.
Action
Severity WARNING
FW-1425
Message
<timestamp>, [FW-1425], <sequence-number>,, INFO, <system-name>,
Switch status changed from <Bad state> to HEALTHY.
Probable
Indicates that the switch status has changed to a healthy state. This occurred because a policy is no
Cause longer violated.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity
INFO
FW-1426
Message
<timestamp>, [FW-1426], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Power supply: <Number Bad>
bad, <Number Missing> absent.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1424
25-77