Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 448

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

58
SEC-1302
SEC-1302
Message
<timestamp>, [SEC-1302], <sequence-number>,, INFO, <system-name>,
This switch does not have all the required PKI objects correctly
installed.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
INFO
SEC-1303
Message
<timestamp>, [SEC-1303], <sequence-number>,, INFO, <system-name>,
This software version does not support security.
Probable
Indicates that the currently installed software version does not support the Brocade Secure Fabric OS
Cause
feature.
Recommended
Run the firmwareDownload command to update the firmware to the latest version for your specific
Action
switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature.
Severity
INFO
SEC-1304
Message
<timestamp>, [SEC-1304], <sequence-number>,, INFO, <system-name>,
This switch has no security license.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
INFO
58-54
Fabric OS Message Reference
Publication Number: 53-1000242-01

Advertisement

Table of Contents
loading

Table of Contents