Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 454

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [SEC-1320], <sequence-number>,, WARNING, <system-

name>, Non-acl domain <Domain Number> tries to join a fabric with

strict fabric wide policy

Indicates that a domain not supporting ACL tried to join a fabric with a strict fabricwide policy.

No action is required. The domain is denied by disallowing all its E-ports from connecting to the fabric.

<timestamp>, [SEC-1321], <sequence-number>,, ERROR, <system-name>,

Failed secure mode enable command. Reason: <Reason>.

Indicates that the security enable failed on the fabric because switch has conflicting configuration such

as fabric wide consistency configuration or AD configuration.

Verify that the security event was planned.

If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to

clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable

<timestamp>, [SEC-1322], <sequence-number>,, WARNING, <system-

name>, Some DCC policy is too large, distribution cancelled

Indicates that this fabric is not able to support a DCC policy with more than 256 ports.

Reconfigure any policy that has more than 256 ports in member list, then save it.

Fabric OS Message Reference

Publication Number: 53-1000242-01