Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 359

NS System Messages
NS-1001
Message
<timestamp>, [NS-1001], <sequence-number>,, WARNING, <system-name>,
The response for request 0x<CT command code> from remote switch
0x<Domain Id> is larger than the max frame size the remote switch
can support!
Probable Indicates that the response payload exceeds the maximum frame size that the remote switch can handle.
Cause
Recommended Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or
Action
v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame
fragmentation and reassembly.
You can also reduce the number of devices connected to the local switch.
Severity
WARNING
NS-1002
Message
<timestamp>, [NS-1002], <sequence-number>,, WARNING, <system-name>,
Remote switch 0x<Domain Id> has firmware revision lower than 2.2:
<Firmware Revision 1st character><Firmware Revision 2nd
character><Firmware Revision 3rd character><Firmware Revision 4th
character> which is not supported!
Probable Indicates that the local switch cannot interact with the remote switch due to incompatible or obsolete
Cause
firmware.
Recommended Run the firmwareDownload command to upgrade the remote switch to the latest level of firmware.
Action
Severity WARNING
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
46
46-1