Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 371

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

PLAT System Messages

<timestamp>, [PLAT-1000], <sequence-number>, FFDC, CRITICAL,

<system-name>, <Function name> <Error string>

Indicates that nonrecoverable PCI errors have been detected.

The system will be faulted and might automatically reboot.

If the system does not reboot, then try issuing the reboot command from a command-line prompt.

Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command

and contact your switch service provider.

<timestamp>, [PLAT-1001], <sequence-number>,, INFO, <system-name>,

Resetting standby CP (double reset may occur)

Indicates that the standby CP is being reset. This message is typically generated by a CP that is in the

process of becoming the active CP. Note that in certain circumstances a CP may experience a double

reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice.

No action is required.

Fabric OS Message Reference

Publication Number: 53-1000242-01