Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 413

SEC-1077
Message
<timestamp>, [SEC-1077], <sequence-number>,, ERROR, <system-name>,
Failed to activate new policy set on all switches.
Probable Indicates that the policy could not be activated. Possible reasons that the policy could not be activate
Cause
include not enough memory or a busy switch.
Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state. Retry
Action
the command when all switches are ready.
Severity ERROR
SEC-1078
Message
<timestamp>, [SEC-1078], <sequence-number>,, ERROR, <system-name>,
No new data to abort.
Probable
Indicates that there are no new changes in the defined security policy database that can be aborted.
Cause
Recommended
Verify that security event was planned. Verify if there were really any changes to the defined policy
Action
database that can be aborted.
Severity
ERROR
SEC-1079
Message
<timestamp>, [SEC-1079], <sequence-number>,, ERROR, <system-name>,
The policy name <policy name> is invalid.
Probable Indicates that the policy name entered in the secPolicyCreate|Activate|Add|Delete command was
Cause invalid.
Recommended Run the command again using a valid policy name.
Action
Severity ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1077
58-19