Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 396

58
SEC-1003
Severity
ERROR
SEC-1003
Message
<timestamp>, [SEC-1003], <sequence-number>,, WARNING, <system-
name>, Fail to download security data to domain <Domain number>
after <Number of retires> retries
Probable
Indicates that the specified domain number failed to download security data after the specified number
Cause of attempts. The primary switch will segment the failed switch after 30 tries. The failed switch might
have had some internal error and failed to accept the database download.
Recommended
Reset the version stamp on the switch to 0 using the secVersionReset command and then rejoin the
Action
switch to the fabric.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
SEC-1005
Message
<timestamp>, [SEC-1005], <sequence-number>,, INFO, <system-name>,
Primary FCS receives data request from domain <Domain number>
Probable Indicates that the primary FCS received a data request from the specified domain. For example, if the
Cause
switch fails to update the database or is attacked (data injection), a message is generated to the primary
FCS to try to correct and resync with the rest of the switches in the fabric.
Recommended
Use the secFabricShow command to verify that the fabric is not being attacked by unauthorized users.
Action
Severity
INFO
SEC-1006
Message
<timestamp>, [SEC-1006], <sequence-number>,, WARNING, <system-
name>, Security statistics error: Failed to reset due to invalid
<data>.
Probable
Indicates that invalid data has been received for any statistic-related command for security
Cause
(secStatsShow or secStatsReset). The counter is updated automatically when a security violation
occurs. This message might also occur if the updating counter fails.
58-2 Fabric OS Message Reference
Publication Number: 53-1000242-01