Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 96

3
BL-1009
If the message persists, replace the blade.
Severity CRITICAL
BL-1009
Message
<timestamp>, [BL-1009], <sequence-number>, FFDC, CRITICAL, <system-
name>, Blade in slot <slot number> timed out initializing the chips.
Probable
Indicates that the blade has failed to initialize the ASIC chips.
Cause
Recommended
Make sure that the blade is seated correctly.
Action
If the blade is seated correctly, reboot or power cycle the blade.
Run the systemVerification command to verify that the blade does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
If the message persists, replace the blade.
Severity CRITICAL
BL-1010
Message
<timestamp>, [BL-1010], <sequence-number>,, WARNING, <system-name>,
Blade in slot <slot number> inconsistent with the hardware
settings.
Probable
Indicates that a failover occurred while some hardware changes were being made on the previously
Cause active CP (such as changing the domain ID).
Recommended
No action is required. This blade has been reinitialized. Because reinitializing a blade is a disruptive
Action operation and can stop I/O traffic, you might have to stop and restart the traffic during this process.
Severity
WARNING
BL-1011
Message
<timestamp>, [BL-1011], <sequence-number>, FFDC, CRITICAL, <system-
name>, Busy with emb-port int. for chip <chip number> in minis
<minis number> on blade <slot number>, chip int. is disabled.
interrupt status=0x<interrupt status>
3-4 Fabric OS Message Reference
Publication Number: 53-1000242-01