Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 457

SNMP System Messages
SNMP-1001
Message
<timestamp>, [SNMP-1001], <sequence-number>,, ERROR, <system-name>,
SNMP service is not available <Reason>.
Probable
Indicates that the SNMP service could not be started because of the specified Reason. You will not be
Cause able to query the switch through SNMP.
Recommended
Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified
Action Reason is an initialization failure, the switch requires a reboot.
Severity ERROR
SNMP-1002
Message
<timestamp>, [SNMP-1002], <sequence-number>,, ERROR, <system-name>,
SNMP <Error Details> initialization failed.
Probable Indicates that the initialization of the SNMP service failed and you will not be able to query the switch
Cause
through SNMP.
Recommended Reboot or power cycle the switch. This will automatically initialize SNMP.
Action
Severity
ERROR
SNMP-1003
Message
<timestamp>, [SNMP-1003], <sequence-number>,, ERROR, <system-name>,
Distribution of Community Strings to Secure Fabric failed.
Probable
Indicates that the changes in the SNMP community strings could not be propagated to other switches in
Cause
the secure fabric.
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
59
59-1