Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 64

1
Reading a RAS System Message
The following is an sample audit event message:
AUDIT, 2005/12/10-09:54:03, [SEC-1000], WARNING, SECURITY, JohnSmith/root/
192.168.132.10/Telnet/CLI, Domain A/JohnsSwitch, , Incorrect password
during login attempt.
The fields in the error message are described in table below.
Table 1-3
Example
AUDIT
2005/12/10-
09:54:03
[SEC-1000]
WARNING
SECURITY
JohnSmith
root
192.168.132.10
Telnet
CLI
Domain A
1-10
Audit Message Field Description
Variable Name
Audit flag
Date and Time
Stamp
Message Module and
Message Number
Severity Level
Event Class
User ID
Role
IP Address
Interface
Application Name
Admin Domain
Description
Identifies the message as an Audit message.
The system time (UTC) when the message was
generated on the switch. The RASLog
subsystem will support an internationalized
timestamp format base on the "LOCAL" setting.
Displays the message module and number. These
values uniquely identify each message in the
Fabric OS and are used to reference the cause
and actions in this manual. Note that not all
message numbers are used and there can be gaps
in the numbering of messages.
Displays the severity of the error in alpha
format:
1 = Critical
2 = Error
3 = Warning
4 = Info
Identifies the event class as one of the following:
Zone
Security
Configuration
Firmware
Fabric
Identifies the user ID.
Identifies the role of the user ID.
Identifies the IP address.
Identifies the interface being used.
Identifies the application name being used on the
interface.
Identifies the Admin Domain, if there is one.
Fabric OS Message Reference
Publication Number: 53-1000242-01