Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 308

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [HIL-1404], <sequence-number>,, WARNING, <system-

name>, <count> fan FRU(s) missing. Install fan FRU(s) immediately.

Indicates that one or more fan FRUs have been removed.

Install the missing fan FRUs immediately.

<timestamp>, [HIL-1501], <sequence-number>,, WARNING, <system-

name>, Slot <slot number>, high temperature (<measured

temperature>).

Indicates that the temperature of this blade has risen above the warning threshold.

Run the fanShow command to verify all the fans are working properly.

Make sure that the area is well ventilated and that the room temperature is within operational range of

your switch. Refer to the hardware reference manual for your switch for the operational temperature

<timestamp>, [HIL-1502], <sequence-number>, FFDC, CRITICAL,

<system-name>, Slot <slot number>, high temperature (<measured

temperature>). Unit will be shut down in 2 minutes if temperature

remains high.

Indicates that the temperature of this blade has risen above the critical threshold. This usually follows a

high-temperature message.

Run the fanShow command to verify all the fans are working properly.

Fabric OS Message Reference

Publication Number: 53-1000242-01