Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 461

SS System Messages
SS-1000
Message
<timestamp>, [SS-1000], <sequence-number>,, INFO, <system-name>,
supportSave has ftp'ed support information to the host with IP
address <host ip>.
Probable Indicates that the supportSave command was used to transfer support information to a remote FTP
Cause
location.
Recommended No action is required.
Action
Severity
INFO
SS-1001
Message
<timestamp>, [SS-1001], <sequence-number>,, WARNING, <system-name>,
supportSave's ftp operation to host IP address <host ip> aborted.
Probable
Indicates that an FTP error occurred during execution of the supportSave command. Complete error
Cause information cannot always be displayed in this message due to possible errors in subcommands being
executed by the supportSave command.
Recommended Check the FTP server and settings. Run the supportFtp command to set the FTP parameters. After the
Action
FTP problem is corrected, rerun the supportSave command.
Severity WARNING
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
60
60-1